Projet de Gmby:   from Turkey (TÜRKIYE).

1- Ps One 5’ LCD
2- 150 W G12 Metal Halide Lamp(5200 K)
3- F:230 Projection Lens
4- 90 mm condensataur ?
5- f:210xf:310 mm 7x10''acrylic fresnel
6- 6 cm fan (1 piece)
7- 4 cm fan (2 pieces)
8- IR Filter
9- Balast and ignitor for 150W HID
10- Necessary electrical equipments and heat proof cables.
11- Required equipments for modification
12- Surface miror
13- Box 32x24x10.5
 

I have sanded my wooden box with sandpaper. Following operation is applying an white undercoat for painting the wooden box.	...
	This is our undercoated box.
This is apparatus for LCD and fresnel lenses.	I have mounted LCD to our apparatus which we have made for it.
I have painted this apparatus to black. I have used warm silicone around the LCD to stop light leak. At the following stage I have mounted the control card of LCD to the apparatus.I have made the colour and contrast modifications.	other
...	I have painted my box to black to avoid get dirty quickly.
Down view of our box and holes for 4cm fans.	Lightbox: View of sheet apparatus and IR filter, in other side there are our condensataur.
LightBox: White things are heat proof liquid joint.	I have completed about %90 of our projection. I will close my box after some tests.
up view of our box	Finally, front view.
Back view	...
...	...
...	I took my first photos with my webcam, due to this, image quality is not so good and these pictures taken before I finishing  all adjustments of the system.I'm not satisfied with these pictures.
...	...
some pictures from nemo..	...
Pictures that I have took with good camera after making all adjustments...	I took pictures of AKI with zooming.
Picture from Kill Bill..	Picture from Shrek..

Diagonal picture size is approximately 200 cm...(screen ratio is 4:3).
My objectives focal is 230mm and I took this screen size by locating 300 cm  far away from the wall.